Suntek Energy Systems Private Limited
Suntek Energy Systems Private Limited
Kukatpally, Hyderabad, Telangana
GST No. 36AATCS9217K1ZK
TrustSEAL Verified
Call 08046031668 47% Response Rate
SEND EMAIL

Solar Water Heaters

Manufacturer of a wide range of products which include 200 lpd fpc-pressurized based solar water heater, 100lpd etc based solar water heater, 250lpd etc based solar water heater, 500lpd etc based solar water heater compact model, 300lpd etc based solar water heater and manifold model etc based solar water heater 500lpd.

200 lpd FPC-Pressurized Based Solar Water Heater

200 lpd FPC-Pressurized Based Solar Water Heater
  • 200 lpd FPC-Pressurized Based Solar Water Heater
  • 200 lpd FPC-Pressurized Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 48,500 / PieceGet Latest Price

Product Details:

Capacity200 lpd
Warranty1 - 5 years
Tank MaterialMild steel with epoxy coating
BrandSuntek
Usage/ApplicationIndustrial and commercial
Type Of CollectorFlat Plate Collector (FPC)
Tank Volume200 lpd
Model NoFPC-DOMESTIC
System temperature output60 - 80 degree Celsius

Flat Plate Collector is one among the technology in solar water heaters which is economical to use. Flat plate collectors are generally more efficient in full sunshine conditions. Heat - transfer fluid (water) is pumped from the hot water storage tank or heat exchanger into the collectors bottom header, and it travels up the risers, collecting heat from the absorber fins, and then exits the collector out of the top header. Flat plate collector model is a traditional model where collectors are made of copper tubes which are selectively coated for generating radiation. The solar radiation is absorbed by flat plate collector which consist of an absorber (selectively coated) sheets with inbuilt channels or riser tubes to carry water. 
Flat Plate Collector Solar water heaters comprise of the storage tank, tank insulation, collectors, electrical backup and supporting structure.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

100LPD ETC Based Solar Water Heater

100LPD ETC Based Solar Water Heater
  • 100LPD ETC Based Solar Water Heater
  • 100LPD ETC Based Solar Water Heater
  • 100LPD ETC Based Solar Water Heater
  • 100LPD ETC Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 18,000 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity100 lpd
Warranty1 - 5 years
Type Of CollectorEvacuated Tube Collector (ETC)
Tank MaterialMild Steel with epoxy coating
Solar Water Heater TypeETC
Usage/ApplicationWater Heating
Available Size100LPD,150LPD,200LPd,300LPd
Stand FrameStainless steel
Circulation MethodThermosyphon
Glass Tube Dimensions58/1800
Ideal For Family Size2-3
Heat Temperature60-80 c
Tubes10
Puff Insulated50mm
Outer CoverMild steel
Electrical Back Up2kw
Inner Tank Thickness1.6mm
Water Heater Capacity100LPD

Evacuated Tube Collector is one of the latest technologies in solar water heater which is economical to use. This is one way to reduce the heat loss inherent than flat plate. Since heat loss due to convection cannot cross a vacuum, it forms an efficient isolation mechanism to keep heat inside the collector pipes. Typically, the water piping in an ETC is therefore surrounded by two concentric tubes of glass separated by a vacuum that emits heat from the sun (to heat the pipe) but limits heat loss. The tube collector is a 3 layered glass tube made of CU, AL, SS. Evacuated tube collector are made of triple layer borosilicate glass tubes which heats water more efficiently even in low temperature.

Domestic ETC based solar water heater:

Available ranges of Domestic ETC based solar water heaters are:

v 100LPD ETC based solar water heater

v 150LPD ETC based solar water heater

v 200LPD ETC based solar water heater

v 250LPD ETC based solar water heater

v 300LPD ETC based solar water heater

v 500LPD ETC based solar water heater compact model

v 500LPD ETC based solar water heater Manifold model

Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

250LPD ETC Based Solar Water Heater

250LPD ETC Based Solar Water Heater
  • 250LPD ETC Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 32,000 / UnitGet Latest Price

Product Details:

BrandSUNTEK
Capacity250lpd(Liters Per Day)
Warranty1-5 Years
Tank MaterialMild steel with epoxy coating
Tubes3 layered(CU,AL,SS)
CirculationThermosyphon
Number of persons using water heaters6-7 persons
ApplicationBathing
Temperature Output60-80 DegreeC
Tank thickness2mm
Insulation materialPuff
Puff Thickness50mm
Puff Density32 kg/m3
Supporting StructureMild Steel powder coated
Dia58
Length of tube1800
Number of tubes25
Electrical backup2000 Watts

Evacuated Tube Collector is one of the latest technologies in solar water heater which is economical to use. This is one way to reduce the heat loss inherent than flat plate. Since heat loss due to convection cannot cross a vacuum, it forms an efficient isolation mechanism to keep heat inside the collector pipes. Typically, the water piping in an ETC is therefore surrounded by two concentric tubes of glass separated by a vacuum that emits heat from the sun (to heat the pipe) but limits heat loss. The tube collector is a 3 layered glass tube made of CU, AL, SS. Evacuated tube collector are made of triple layer borosilicate glass tubes which heats water more efficiently even in low temperature.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

500LPD ETC Based Solar Water Heater Compact Model

500LPD ETC Based Solar Water Heater Compact Model
  • 500LPD ETC Based Solar Water Heater Compact Model
  • 500LPD ETC Based Solar Water Heater Compact Model
  • 500LPD ETC Based Solar Water Heater Compact Model
Get Best Quote
Approx. Price: Rs 54,000 / UnitGet Latest Price

Product Details:

BrandSUNTEK
Capacity500 lpd
Warranty1-5 Years
Tank MaterialMild steel with epoxy coating
Tubes3 layered(CU, AL, SS)
CirculationThermosyphon
Number of persons using water heaters12-13 persons
ApplicationBathing and House hold purpose
Temperature Output60-80 DegreeC
Tank thickness2mm
Insulation materialPuff
Puff Thickness50mm
Puff Density32 kg/m3
Supporting StructureMild Steel powder coated
Dia58
Length of tube2100
Number of tubes34
Electrical backup3000Watts

Evacuated Tube Collector is one of the latest technologies in solar water heater which is economical to use. This is one way to reduce the heat loss inherent than flat plate. Since heat loss due to convection cannot cross a vacuum, it forms an efficient isolation mechanism to keep heat inside the collector pipes. Typically, the water piping in an ETC is therefore surrounded by two concentric tubes of glass separated by a vacuum that emits heat from the sun (to heat the pipe) but limits heat loss. The tube collector is a 3 layered glass tube made of CU, AL, SS. Evacuated tube collector are made of triple layer borosilicate glass tubes which heats water more efficiently even in low temperature.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

300LPD ETC Based Solar Water Heater

300LPD ETC Based Solar Water Heater
  • 300LPD ETC Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 36,000 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity300 lpd
Warranty1-5 Years
Type Of CollectorEvacuated Tube Collector (ETC)
Tank MaterialMild steel with epoxy coating
Tubes3 layered(CU,AL,SS)
CirculationThermosyphon
Number of persons using water heaters8-9 persons
ApplicationBathing
Temperature Output60-80 Degree Celsius
Tank thickness2 mm
Insulation materialPuff
Puff Thickness50 mm
Puff Density32 kg/m3
Supporting StructureMild Steel powder coated
Dia58
Length of tube1800
Number of tubes30
Electrical backup2000 Watts

Evacuated Tube Collector is one of the latest technologies in solar water heater which is economical to use. This is one way to reduce the heat loss inherent than flat plate. Since heat loss due to convection cannot cross a vacuum, it forms an efficient isolation mechanism to keep heat inside the collector pipes. Typically, the water piping in an ETC is therefore surrounded by two concentric tubes of glass separated by a vacuum that emits heat from the sun (to heat the pipe) but limits heat loss. The tube collector is a 3 layered glass tube made of CU, AL, SS. Evacuated tube collector are made of triple layer borosilicate glass tubes which heats water more efficiently even in low temperature.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

Manifold Model ETC Based Solar Water Heater 500LPD

Manifold Model ETC Based Solar Water Heater 500LPD
  • Manifold Model ETC Based Solar Water Heater 500LPD
Get Best Quote
Approx. Price: Rs 64,000 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity500 lpd
Warranty1 - 5 years
Tank MaterialMild steel / Stainless steel
Tubes3 layered(CU,AL,SS)
CirculationThermosyphon
ApplicationIndustrial purpose
Temperature Output60-80 DegreeC
Tank thicknessAs per tank material
Insulation materialRockwool
Puff Thickness100mm
Puff Density48 kg/m3
Supporting StructureMild Steel powder coated
Manifold1 No for each 500lpd
Dia58
Length of tube1800
Number of tubes50 Nos for each manifold

Evacuated Tube Collector is one of the latest technologies in solar water heater which is economical to use. This is one way to reduce the heat loss inherent than flat plate. Since heat loss due to convection cannot cross a vacuum, it forms an efficient isolation mechanism to keep heat inside the collector pipes. Typically, the water piping in an ETC is therefore surrounded by two concentric tubes of glass separated by a vacuum that emits heat from the sun (to heat the pipe) but limits heat loss. The tube collector is a 3 layered glass tube made of CU, AL, SS. Evacuated tube collector are made of triple layer borosilicate glass tubes which heats water more efficiently even in low temperature.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

200LPD ETC Based Solar Water Heater

200LPD ETC Based Solar Water Heater
  • 200LPD ETC Based Solar Water Heater
  • 200LPD ETC Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 28,000 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity200 lpd
Warranty1-5 Years
Type Of CollectorEvacuated Tube Collector (ETC)
Tank MaterialMild steel with epoxy coating
Tubes3 layered(CU,AL,SS)
CirculationThermosyphon
Number of persons using water heaters5-6 persons
ApplicationBathing
Temperature Output60-80 Degree Celsius
Tank thickness2mm
Insulation materialPuff
Puff Thickness50 mm
Puff Density32 kg/m3
Supporting StructureMild Steel powder coated
Dia58
Length of tube1800
Number of tubes20
Electrical backup2000Watts

Evacuated Tube Collector is one of the latest technologies in solar water heater which is economical to use. This is one way to reduce the heat loss inherent than flat plate. Since heat loss due to convection cannot cross a vacuum, it forms an efficient isolation mechanism to keep heat inside the collector pipes. Typically, the water piping in an ETC is therefore surrounded by two concentric tubes of glass separated by a vacuum that emits heat from the sun (to heat the pipe) but limits heat loss. The tube collector is a 3 layered glass tube made of CU, AL, SS. Evacuated tube collector are made of triple layer borosilicate glass tubes which heats water more efficiently even in low temperature.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

250lpd FPC- Pressurized Based Solar Water Heater

250lpd FPC- Pressurized Based Solar Water Heater
  • 250lpd FPC- Pressurized Based Solar Water Heater
  • 250lpd FPC- Pressurized Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 54,000 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity250lpd(Liters Per Day)
Warranty1-5 Years
Tank MaterialMild steel with epoxy coating
Tank Volume200 lpd
Number Of Collectors2
CirculationThermosyphon
SealingEPDM rubber
Number of persons using water heaters5-6 persons
ApplicationBathing
Temperature Output60-80 DegreeC
Tank thickness4mm
Insulation materialPuff
Puff Thickness50 mm
Puff Density32 kg/m3
Solar collectorsSelectively coated
Absorber fin materialCopper
Header materialCopper
Riser materialCopper
Absorber coatingSelective coated NALSUN
Box materialAluminum extrusion,ANODIZED for corrosive /Coastal/ Saline area protection
Collector insulationRock wool pads for side & bottom
FlangesBrass,round with four bolt holes
GlassToughened glass,4mm thick
GasketsEPDM rubber
HardwareStainless steel screws
Reflector foilAluminum,50 microns
Box Dimensions2025mm x 1025mm x 95mm
Aperture area2.08 Square. Meters
Number of risers9 nos
Header size25.4 mm
Protrusion inside the header2mm
Connecting nuts bolts and washersStainless steel-304
Connecting gasketsEPDM Punched
Electrical backup2000 Watts

Flat Plate Collector is one among the technology in solar water heaters which is economical to use. Flat plate collectors are generally more efficient in full sunshine conditions. Heat - transfer fluid (water) is pumped from the hot water storage tank or heat exchanger into the collectors bottom header, and it travels up the risers, collecting heat from the absorber fins, and then exits the collector out of the top header. Flat plate collector model is a traditional model where collectors are made of copper tubes which are selectively coated for generating radiation. The solar radiation is absorbed by flat plate collector which consist of an absorber (selectively coated) sheets with inbuilt channels or riser tubes to carry water.
Flat Plate Collector Solar water heaters comprise of the storage tank, tank insulation, collectors, electrical backup and supporting structure.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

300lpd FPC- Pressurized Based Solar Water Heater

300lpd FPC- Pressurized Based Solar Water Heater
  • 300lpd FPC- Pressurized Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 68,500 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity300lpd(Liters Per Day)
Warranty1-5 Years
Tank MaterialMild steel with epoxy coating
Number Of Collectors3
CirculationThermosyphon
SealingEPDM rubber
Number of persons using water heaters6-7 persons
ApplicationBathing
Temperature Output60-80 DegreeC
Tank thickness4mm
Insulation materialPuff
Puff Thickness50mm
Puff Density32 kg/m3
Solar collectorsSelectively coated
Absorber fin materialCopper
Header materialCopper
Riser materialCopper
Absorber coatingSelective coated NALSUN
Box materialAluminum extrusion, ANODIZED for corrosive /Coastal/ Saline area protection
Collector insulationRock wool pads for side & bottom
FlangesBrass, round with four bolt holes
GlassToughened glass, 4mm thick
GasketsEPDM rubber
HardwareStainless steel screws
Reflector foilAluminum, 50 microns
Box Dimensions2025mm x 1025mm x 95mm
Aperture area2.08 Square. Meters
Number of risers9 nos
Header size25.4 mm
Protrusion inside the header2mm
Connecting nuts bolts and washersStainless steel-304
Connecting gasketsEPDM Punched
Electrical backup2000 Watts

Flat Plate Collector is one among the technology in solar water heaters which is economical to use. Flat plate collectors are generally more efficient in full sunshine conditions. Heat - transfer fluid (water) is pumped from the hot water storage tank or heat exchanger into the collectors bottom header, and it travels up the risers, collecting heat from the absorber fins, and then exits the collector out of the top header. Flat plate collector model is a traditional model where collectors are made of copper tubes which are selectively coated for generating radiation. The solar radiation is absorbed by flat plate collector which consist of an absorber (selectively coated) sheets with inbuilt channels or riser tubes to carry water. 
Flat Plate Collector Solar water heaters comprise of the storage tank, tank insulation, collectors, electrical backup and supporting structure.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

375lpd FPC- Pressurized Based Solar Water Heater

375lpd FPC- Pressurized Based Solar Water Heater
  • 375lpd FPC- Pressurized Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 71,500 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity375lpd(Liters Per Day)
Warranty1-5 Years
Tank MaterialMild steel with epoxy coating
Number Of Collectors3
CirculationThermosyphon
SealingEPDM rubber
Number of persons using water heaters8-9 persons
ApplicationBathing
Temperature Output60-80 DegreeC
Tank thickness4mm
Insulation materialPuff
Puff Thickness50mm
Puff Density32 kg/m3
Solar collectorsSelectively coated
Absorber fin materialCopper
Header materialCopper
Riser materialCopper
Absorber coatingSelective coated NALSUN
Box materialAluminum extrusion, ANODIZED for corrosive /Coastal/ Saline area protection
Collector insulationRock wool pads for side & bottom
FlangesBrass, round with four bolt holes
GlassToughened glass, 4mm thick
GasketsEPDM rubber
HardwareStainless steel screws
Reflector foilAluminum, 50 microns
Box Dimensions2025mm x 1025mm x 95mm
Aperture area2.08 Square. Meters
Number of risers9 nos
Header size25.4 mm
Protrusion inside the header2mm
Connecting nuts bolts and washersStainless steel-304
Connecting gasketsEPDM Punched
Electrical backup2000 Watts

Flat Plate Collector is one among the technology in solar water heaters which is economical to use. Flat plate collectors are generally more efficient in full sunshine conditions. Heat - transfer fluid (water) is pumped from the hot water storage tank or heat exchanger into the collectors bottom header, and it travels up the risers, collecting heat from the absorber fins, and then exits the collector out of the top header. Flat plate collector model is a traditional model where collectors are made of copper tubes which are selectively coated for generating radiation. The solar radiation is absorbed by flat plate collector which consist of an absorber (selectively coated) sheets with inbuilt channels or riser tubes to carry water. 
Flat Plate Collector Solar water heaters comprise of the storage tank, tank insulation, collectors, electrical backup and supporting structure.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

500lpd FPC- Pressurized Based Solar Water Heater

500lpd FPC- Pressurized Based Solar Water Heater
  • 500lpd FPC- Pressurized Based Solar Water Heater
  • 500lpd FPC- Pressurized Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 86,000 / PieceGet Latest Price

Product Details:

BrandSUNTEK
CapacityCapacity
Warranty1-5 Years
Type Of CollectorFlat Plate Collector (FPC)
Tank MaterialTank material
Tank Volume500 lpd
Number Of Collectors4
CirculationThermosyphon
SealingEPDM rubber
Number of persons using water heaters12-13 persons
ApplicationBathing
Temperature Output60-80 DegreeC
Tank thickness4mm
Insulation materialPuff
Puff Thickness50mm
Puff Density32 kg/m3
Solar collectorsSolar collectors
Absorber fin materialCopper
Header materialCopper
Riser materialCopper
Absorber coatingSelective coated NALSUN
Box materialAluminum extrusion,ANODIZED for corrosive /Coastal/ Saline area protection
Collector insulationRock wool pads for side & bottom
FlangesBrass,round with four bolt holes
GlassToughened glass,4mm thick
GasketsGaskets
HardwareStainless steel screws
Reflector foilAluminum,50 microns
Box Dimensions2025mm x 1025mm x 95mm
Aperture area2.08 Square Meters
Number of risers9 nos
Header size25.4 mm
Protrusion inside the header2mm
Connecting nuts bolts and washersStainless steel-304
Connecting gasketsEPDM Punched
Electrical backup3000 Watts

Flat Plate Collector is one among the technology in solar water heaters which is economical to use. Flat plate collectors are generally more efficient in full sunshine conditions. Heat - transfer fluid (water) is pumped from the hot water storage tank or heat exchanger into the collectors bottom header, and it travels up the risers, collecting heat from the absorber fins, and then exits the collector out of the top header. Flat plate collector model is a traditional model where collectors are made of copper tubes which are selectively coated for generating radiation. The solar radiation is absorbed by flat plate collector which consist of an absorber (selectively coated) sheets with inbuilt channels or riser tubes to carry water. 
Flat Plate Collector Solar water heaters comprise of the storage tank, tank insulation, collectors, electrical backup and supporting structure.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

150LPD ETC Based Solar Water Heater

150LPD ETC Based Solar Water Heater
  • 150LPD ETC Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 19,500 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity150 lpd
Warranty1 - 5 years
Type Of CollectorEvacuated Tube Collector (ETC)
Tank MaterialMild steel with epoxy coating
Solar Water Heater TypeETC
Usage/ApplicationWater Heating
Tank Volume150
Available Size150LPD
Installation ProvidedFree
Glass Tube Dimensions58/1800
Heat Temperature60-80 C
Tubes15
Puff Insulated50mm
Electrical Back Up2kw
Number Of Person3-4

Evacuated Tube Collector is one of the latest technologies in solar water heater which is economical to use. This is one way to reduce the heat loss inherent than flat plate. Since heat loss due to convection cannot cross a vacuum, it forms an efficient isolation mechanism to keep heat inside the collector pipes. Typically, the water piping in an ETC is therefore surrounded by two concentric tubes of glass separated by a vacuum that emits heat from the sun (to heat the pipe) but limits heat loss. The tube collector is a 3 layered glass tube made of CU, AL, SS. Evacuated tube collector are made of triple layer borosilicate glass tubes which heats water more efficiently even in low temperature.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

100lpd FPC- Pressurized Based Solar Water Heater

100lpd FPC- Pressurized Based Solar Water Heater
  • 100lpd FPC- Pressurized Based Solar Water Heater
Get Best Quote
Approx. Price: Rs 32,500 / PieceGet Latest Price

Product Details:

BrandSUNTEK
Capacity100lpd(Liters Per Day)
Warranty1-5 Years
Tank MaterialMild steel with epoxy coating
Number Of Collectors1
CirculationThermosyphon
SealingEPDM rubber
Number of persons using water heaters2-3 persons
ApplicationBathing
Temperature Output60-80 DegreeC
Tank thickness4mm
Insulation materialPuff
Puff Thickness50mm
Puff Density32 kg/m3
Solar collectorsSelectively coated
Absorber fin materialCopper
Header materialCopper
Riser materialCopper
Absorber coatingSelective coated NALSUN
Box materialAluminum extrusion,ANODIZED for corrosive /Coastal/ Saline area protection
Collector insulationRock wool pads for side & bottom
FlangesBrass,round with four bolt holes
GlassToughened glass,4mm thick
GasketsEPDM rubber
HardwareStainless steel screws
Reflector foilAluminum,50 microns
Box Dimensions2025mm x 1025mm x 95mm
Aperture area2.08 Square. Meters
Number of risers9 nos
Header size25.4 mm
Protrusion inside the header2mm
Connecting nuts bolts and washersStainless steel-304
Connecting gasketsEPDM Punched
Electrical backup2000 Watts

We are the leading supplier of 100lpd FPC- Pressurized Based Solar Water Heatermade available to our clients at competitive prices.


Flat Plate Collector is one among the technology in solar water heaters which is economical to use. Flat plate collectors are generally more efficient in full sunshine conditions. Heat - transfer fluid (water) is pumped from the hot water storage tank or heat exchanger into the collectors bottom header, and it travels up the risers, collecting heat from the absorber fins, and then exits the collector out of the top header. Flat plate collector model is a traditional model where collectors are made of copper tubes which are selectively coated for generating radiation. The solar radiation is absorbed by flat plate collector which consist of an absorber (selectively coated) sheets with inbuilt channels or riser tubes to carry water.
Flat Plate Collector Solar water heaters comprise of the storage tank, tank insulation, collectors, electrical backup and supporting structure.
Request
Callback


Additional Information:

  • Delivery Time: 1 week
Yes! I am Interested

Industrial Solar Water Heater ETC Model

Industrial Solar Water Heater ETC Model
  • Industrial Solar Water Heater ETC Model
  • Industrial Solar Water Heater ETC Model
  • Industrial Solar Water Heater ETC Model
  • Industrial Solar Water Heater ETC Model
  • Industrial Solar Water Heater ETC Model
  • Industrial Solar Water Heater ETC Model
  • Industrial Solar Water Heater ETC Model
Ask For Price
Product Price :Get Latest Price

Product Details:

Capacity500LPD to 1,00,000LPD
Warranty1 - 5 years
Type Of CollectorEvacuated Tube Collector (ETC)
Tank MaterialMild steel with epoxy coating and Stainless Steel
Usage/ApplicationIndustrial and commercial
Tank Volume500lpd to 1,00,000lpd
BrandSuntek
Power SourceSolar Energy

Evacuated Tube Collector do not heat the water directly within the tubes. Instead, air is removed or evacuated from the space between the tubes, forming a vacuum (hence the name evacuated tubes). This vacuum acts as an insulator reducing any heat loss significantly to the surrounding atmosphere either through convection or radiation making the collector much more efficient than the internal. The Vacuum tube collector absorbs the heat from the solar radiation & heats up the water stored in the system through the Thermosiphonic effect.
Request
Callback


Additional Information:

  • Delivery Time: 1 week to 3 weeks
Yes! I am Interested

FPC Solar Water Heater Industrial Model

FPC Solar Water Heater Industrial Model
  • FPC Solar Water Heater Industrial Model
  • FPC Solar Water Heater Industrial Model
  • FPC Solar Water Heater Industrial Model
  • FPC Solar Water Heater Industrial Model
Ask For Price
Product Price :Get Latest Price

Product Details:

Capacity500 lpd
Warranty1 - 5 YEARS
Type Of CollectorFlat Plate Collector (FPC)
Solar Water Heater TypeFlat Plate Collectors (FPC)
Usage/ApplicationCommercial
BrandSuntek
Tank MaterialMild Steel with epoxy coating
Tank Volume500 lpd, More than 500
Back Up HeaterAvailable
Puff InsulatedYes
Model NoFPC
Box Dimensions2025mm x 1025mm x 95mm
Header size25.4 mm
Material density48 Kg/m3

Suntek Energy Systems Pvt ltd, is a leading manufacturer of Solar water Water Heating Systems established in 2008.

FLATE PLATE COLLECTOR MODEL (INDUSTRIAL):

Each collector : 125 lpd
Application : Bathing , Steaming and other domestic and
commercial purposes.
Material : Mild steel.
Tank size : Depends on requirement (Mild steel)
Request
Callback


Additional Information:

  • Delivery Time: 1 week to 3 weeks
Yes! I am Interested

Solar Evacuated Tubes

Solar Evacuated Tubes
  • Solar Evacuated Tubes
Ask For Price
Product Price :Get Latest Price

Product Details:

Usage/ApplicationIndustrial and commercial
MaterialStainless Steel
Length of tube1800mm
Diameter of inner tube47mm
BrandSuntek
Diameter of outer tube58mm

We are the leading manufacturer of Solar Evacuated Tubes and our product is made of good quality.
Request
Callback
Yes! I am Interested
X

Explore More Product



Reach Us
Bhavani Suresh (Managing Director)
Suntek Energy Systems Private Limited
Plot No. 77, 2nd Floor, Subhodaya Colony, Allwyn Colony Road
Kukatpally, Hyderabad - 500072, Telangana, India


Call Us


Send E-mailSend SMS